TR 60 LCD
Questions about the Applicator?
You have questions about the product, want to get a quote or place an order?
The TR 60 LCD Hot-Spray-System consists of the TR 60 LCD glue gun and the stand on which the gun may be deposited.
The TR 60 LCD is a hot-melt adhesive spray system. Spray application is a non-contact glue application, which means it goes easy on the materials that are about to be glued. Also, spray application allows covering great areas and using very little glue. A stand for storing with built in pressure regulator and manometer is part of the system and permanently attached to the TR 60 LCD, so setting the right glue output and spray pattern becomes very easy. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue. Thanks to the built in electronic temperature regulation the glue gun is ready to work within 3 to 10 minutes. Furthermore, it keeps the temperature on a constant level thus is a perfect suit for processing temperature-sensitive hotmelt glue. The LCD-display and push-buttons allow a precise temperature adjustment. This way, the user always knows the current temperature of the glue applicator and is able to apply the glue at the intended temperature. The TR 60 LCD hot-melt glue gun can be loaded with granulate, pillows and 43 mm slugs. It offers maximum flexibility for choosing the right glue and lets you benefit from cost-advantages ofdifferent shapes of hot-melt. The capacity of 250 ml is sufficient for numerous gluings. The TR 60 LCD can be switched to dot- and lineapplication with an adapter. The number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.
Click to show data sheet!
|Weight applicator||1200 g|
|Power connection||230 V (50 Hz) 2,09 A / 120 V (60 Hz) 3,3 A|
|Power consumption||230 V: 480 Watt / 120 V: 400 Watt|
|Protection class||I, IP 30|
|Temperature control, display||Electronic, digital|
|Temperature limitation||Temperatur monitor|
|Operating temperature||ca. 50 – 210 °C (on request: max. 250 °C)|
|Temperature constancy||± 2 °C|
|Heat-up time||ca. 3 – 10 min.|
|Gross capacity||250 ml|
|Conveyor system||Air pressure|
|Operating pressure||0,5 – 6 bar|
|Length of connections (stand to handgun)||4,5 m|
|Length of electrical connection||4 m|
|Length connection set||3 m|
|Stand with pressure regulator + manometer||yes|
|Recommended melting goods||Hot-melt granules, pillows, 43mm sticks|
Here the suitable accessories
Nozzles for TR 60 LCD
Compatible nozzles for the Reka TR 60 LCD hot-spray system for
– spinning spray application
– spiral spray application
– dot / bead application
Nozzles for all applicators
- Extensive range of nozzles
- Different application patterns
- Customized special constructions possible
- Hands-free triggering of adhesive application
- Compatible with all pneumatic Reka devices
- Easy handling and assembly
- Compatible with all pneumatic REKA applicators
- Adhesive release via foot switch
- Simple assembly / handling
- Feather-light work
- Freedom of movement despite weight relief
- Compatible with all REKA applicators
List of documents to download concerning this product.
You have a challenge for us? We solve gluing problems!